Lift steel safely without slings, and drill big holes anywhere the work is.
Permanent magnetic lifters for handling plate and round stock, and portable magnetic-base drilling machines that clamp to the workpiece. Two ways to bring the tool to heavy steel instead of the other way round.
Nd-Fe-B magnets with a manual on/off handle and no power supply. A V-groove face grips both flat plate and round stock.
Available tested to 2x or 3x the rated lifting capacity, with a test certificate.
Portable magnetic-base drills for holes up to 80, 100 and 120 mm with annular cutters.
With tapping capability for drill-and-tap in one setup.
| Product | Capacity | Best for |
|---|---|---|
| PML permanent lifter | Rated load, tested 2x / 3x | Lifting steel plate, blocks, columns |
| Schifler SWC 80 / 80 WT | Up to 80 mm holes | Site and fabrication drilling, optional tapping |
| Schifler SWC 100 / 100 WT | Up to 100 mm holes | Heavier structural drilling |
| Schifler SWC 120 WT | Up to 120 mm holes | Large-diameter holes with tapping |
A magnetic lifter grips the whole face, so there are no slings to slip.
PML lifters use permanent magnets, so the load stays gripped even if power is lost.
Magnetic-base drills clamp to the work, so big holes get made on the beam.
WT models thread the hole in the same setup, saving a second operation.
