Precision threading from M3 to M48, off the machining centre, repeated fast and clean cut after cut.
Free your VMC and your operators from repetitive threading. These electric tapping machines hold exact depth and pitch on every hole, across four capacities from M3 up to M48.
M3 to M16. 600 W, spindle 0 to 312 rpm. Fast, light-duty for small threads at volume.
M3 to M24. 1200 W, spindle 0 to 200 rpm. General shop workhorse across a wide thread range.
M6 to M36. 1200 W, spindle 0 to 156 rpm. Larger threads with more torque at lower speed.
M6 to M48. 1200 W, spindle 0 to 50 rpm. Heavy threading in big holes where torque rules.
1000 x 900 x 900 mm, for a stable dedicated station.
Full M3 to M48 tapping collet set; 600 to 1000 kg magnetic base option.
| Model | Tapping capacity | Spindle speed | Working reach | Power |
|---|---|---|---|---|
| SMT16 | M3 to M16 | 0 to 312 rpm | 1100 mm | 600 W / 220 V |
| SMT24 | M3 to M24 | 0 to 200 rpm | 1100 mm | 1200 W / 220 V |
| SMT36 | M6 to M36 | 0 to 156 rpm | 1200 mm | 1200 W / 220 V |
| SMT48 | M6 to M48 | 0 to 50 rpm | 1200 mm | 1200 W / 220 V |
Larger threads need more torque, so bigger models run slower. Match the model to your largest tap, not your smallest.
Move threading off your machining centre and keep expensive spindle time on cutting.
Exact depth and pitch on every cycle, for clean assembly and fewer rejects.
Powered tapping with a balanced arm cuts cycle time and operator fatigue against manual methods.
Steel table, magnetic base and a full collet set let you build the station around your parts.
